Remove Emissions From Ecm
If you remove the EGR, you need to address it in the chip. Otherwise the ECM will be confused and start throwin codes. To do this, you have to change the EGR on and off constants to 254 MPH once you're in the chip. 1 person likes this. We can do these emission deletes at our 10 bay diesel shop or tune your ECM remotely and ship you all the necessary parts to eliminate your emission. Eventually, I planning on leveraging the new allowance to permanently remove emissions/nuisance codes and delete VATS, and then have a usable check engine light. What's the cheapest/safest way to achieve this? Our OBDII/CAN controller is read-only right now - well other than clearing ad hoc codes that is.
Description
2005-2006 V8 5.3 – 6.0 (please email us for your application, additional cost may apply). ECM programming only. Customer supplied E40 ECM. Service includes ECM Flash from GM SPS, Custom Tune via HP Tuners.
Update PCM with latest Calibration from GM SPS
Remove all emissions items
Remove A/C functions
Turn off Anti theft functions
Turn on or off fans or Set Fan temps
Remove Rear O2 sensors
Disable any DTC code you want
Set or remove speed/rev limiters
Operating system patches
Custom operating systems (2 Bar, 3 Bar, Speed Density) may be available upon request for and added cost.
When the automobile was first invented, it was a purely mechanical creation. Fast-forward 130 years: Dozens of computers control everything from wiper blades and power windows to the internal combustion engine and transmission. The two main computers we usually worry about are the engine or powertrain control module (ECM or PCM) and the transmission control module (TCM).
Physically, the ECM and TCM may be located anywhere in the vehicle, such as in the trunk, under the dash, or under the hood. Using dozens of sensors, such as those that measure engine coolant temperature or transmission output shaft speed, the ECM monitors engine and transmission function. Using this data, it can fine-tune actuators to deliver more power when needed and reduced emissions whenever possible.
If the ECM detects a problem, such as sensor data out of sync or air flow readings that don’t “make sense,” it will turn on the check engine light, also known as the malfunction indicator lamp or service engine soon light (CEL, MIL, or SES). At the same time, the ECM stores a diagnostic trouble code (DTC) in memory.
Dd15 Dpf Delete Software
If the check engine light comes on, one or more of some 10,000 DTCs might be stored in ECM memory. While the DTC does not tell an auto repair technician what to replace, it can lead them in the right direction to make a repair. Once repairs are completed, the technician clears or “resets” the DTCs, turning off the CEL. If you’re a do-it-yourselfer or you just don’t want to see the light, you have a couple of options to reset the check engine light, aside from pulling the bulb or covering it with electrical tape.
Fix the Problem
By far, the best way to reset the check engine light is to fix the problem that the ECM is reporting. Once the ECM sees that the problem is no longer occurring, such as a cylinder misfire or loose gas cap, it will clear the DTC and turn off the check engine light on its own.
The only problem with this method is that it’s a waiting game. Each vehicle has its own criteria for self-clearing DTCs and turning off the CEL, so it may take days or weeks for the ECM to do it on its own. If you can’t wait that long, there are two more methods to reset the check engine light.
Detroit Diesel Dpf Delete
OBD2 Scan Tool
The easiest way to reset the check engine light and clear any codes is to use a scan tool, which plugs into the ODB2 DLC (On-Board Diagnostics Generation Two Data Link Connector) port, usually somewhere on the driver’s side. Check your owner’s manual for the location. There are different types of scan tools, each varying in price, capability, and usage.
- Bluetooth OBD2 dongles are generally the least expensive and smallest, but they require a smartphone app to operate the dongle and communicate with the vehicle. Paid apps give you more control than free apps, such as being able to view live data or perform live testing, but free apps should be able to read and clear DTCs.
- USB OBD2 cables are the next tier up, and are comparable to what many dealership and independent auto repair technicians use to diagnose the check engine light. A USB OBD2 cable connects your laptop to your car, and requires software to operate. Again, paid OBD2 software gives you more control than free software packages.
- Standalone OBD2 scan tools can range in price from lower than USB cables to several thousand dollars. For DIYers, you don’t need to invest in a top-of-the-line scan tool for basic diagnostic functions, such as reading and clearing DTCs.
To reset the check engine light using the scan tool, whatever type you use, start with your vehicle turned off. Plug your OBD2 scan tool into the DLC, then turn the key to the “On” position, but do not start the engine. At this point, you should have the option on your tool, laptop, or app to connect to the ECM, and you’ll have to wait a minute or so for it to connect and communicate with the ECM.
Activate the function “Clear DTCs” or “Erase Codes” or similar, which may take a few seconds to complete. Read the documentation that came with your particular tool or app for specific instructions. After the scan tool confirms the operation is complete, turn the key to the “OFF” position for at least 10 seconds. You should be able to start the vehicle, at which point the check engine light should be off. Read the manual for your scan tool or app for exact instructions.
Remove Emissions From Ecm Car
ECM Hard Reset
One final option is called a “Hard Reset,” which requires you to disconnect the battery. With the vehicle turned “OFF,” disconnect the battery negative (–) terminal clamp. This usually requires just a 10 mm or 1/2-in socket or wrench. With the battery disconnected, depress the brake for a about a minute. This will deplete any energy in vehicle capacitors. After enough time as passed, release the brake and reconnect the battery.
Depending on the vehicle, this may or may not work, because ECM memory may not be voltage dependent. If the hard reset is successful, DTCs and the CEL will be cleared. Still, your vehicle may not “feel right” for a couple of days until the ECM and TCM relearn their fine-tuning. Some car radios and aftermarket alarm systems may go into anti-theft mode, as well, and you may be prevented from starting the car or using the radio without a certain code or procedure.
Why Do We Need This?
The main reason for the check engine light is to let you know that your vehicle isn’t running as well as it was designed, and is probably generating higher emissions than it should. At the same time, you might also notice a decrease in performance or fuel economy. The best thing to do is to fix the problem that the ECM is detecting. This will keep your emissions down and reduce refueling costs.